Your guide to the new U.S. Department of Energy Pool Pump Regulations
Dedicated Purpose Pool Pump Regulations (DP3) and What it Means for You
Focus on impact to in-ground residential pool pumps
DOE Educational Resources
How Will the New DOE Pump Regulations Affect Your Business
Learn more about what the new regulations mean for you:
Most pool pumps with a motor rating of 5.0 THP or less will be required to meet the minimum energy-efficiency standards.
Effective July 19, 2021, new U.S. Department of Energy (DOE) regulations will go into effect that require Dedicated Purpose Pool Pumps (DP3) manufactured in or imported into the U.S. meet minimum energy-efficiency standards. The standards apply to all pool pumps with a Hydraulic Horsepower (HHP) rating ≤ 2.5 HHP, with some limited exceptions. HHP is approximately 50% of the pump motor's total horsepower (THP) rating.
The following classes of pool pumps are exempt from meeting the minimum energy-efficiency standards:
- Waterfall Pumps that operate at ≤ 30 feet of head with a maximum speed of ≤ 1,800 RPM
- Integral Sand- and Cartridge-Filter Pool Pumps
- Storable Electric Spa / Rigid Electric Spa Pumps
- Pumps with 3-Phase Motors
Two Terms to be Familiar with:
Hydraulic Horsepower (HHP)A standardized measurement of how much water the pump moves and is roughly half of the pump motor THP. A 5.0 THP pump will have a HHP of roughly 2.5 HHP.
Weighted Energy Factor (WEF)A standardized measurement of how much energy is required to move the water in terms of gallons per kWh of energy use. A pump with a WEF of 7.847 means the pump is rated as being able to pump 7,847 gallons of water with one kWh of energy.
DP3 Regulation FAQs
No. The regulations restrict the ability of manufacturers to manufacture or import non-compliant pumps on or after this date.
What does this mean for you:
- No inventory in the supply chain needs to be returned
- As the regulation is currently written, all pumps in the supply chain as of July 18, 2021, can still be sold whether they meet the new requirements of not
- Per the currently written regulation, non-compliant pumps which the manufacturers have on hand as of July 18, 2021 can still be sold to distribution; in turn, distribution can sell these non-compliant pumps to pool professionals, and pool professionals can sell them to homeowners
- Unfortunately, there are two accompanying “motor rules” that have been proposed, one by the DOE and another by the California Energy Commission (CEC) — these have yet to be finalized. These rules may restrict the sale of some replacement motors and pumps, even if they meet the current minimum energy performance requirements.
- Until these rules are finalized, manufacturers will be hesitant to provide an official, final list. In general, all variable-speed pumps will be compliant while most single- and two-speed pumps with a motor THP rating ≥ 1.0 THP will be non-compliant.
Manufacturers bear sole responsibility to ensure only compliant pumps are manufactured or imported starting on July 19, 2021.
HHP stands for Hydraulic Horsepower and is generally used to measure how much water a pump moves. THP refers to the Total Horsepower of the motor used on the pump. HHP is roughly half of the THP rating of the motor.
The easiest way to understand WEF is to view it as you would Miles Per Gallon (MPG) for a motor vehicle. The higher the WEF, the more energy-efficient the pump is. In general, pumps with a lower HHP/THP rating will have higher WEF ratings.
Manufacturers will be required to publish WEF and THP on the pump rating label as well as other product material on all pumps manufactured and/or imported on or after July 19, 2021.
No. Pumps still need to be sized properly for the application, (you would not expect a low HHP/THP pump to move enough water to effectively filter a 40,000 gallon pool). Homeowners need to rely on their Pool Professional to prescribe the best pump for the application. WEF is simply a reference point that indicates energy efficiency.
The regulations do not make a distinction between in-ground and above-ground pool pumps. Rather, most pumps used in above-ground applications are classified as “non self-priming” pool pumps. The minimum WEF standards for these types of pumps are lower than “self-priming” pool pumps used in most in-ground applications. The result is most non-self priming single-speed pumps meet the minimum energy-efficiency requirements and will continue to be available.