Watermatic® Liquid Systems

Automatically maintain the chemical balance in your swimming pool and spa

The Watermatic L-1 is a complete system for feeding liquid chlorine and liquid muriatic acid.

Find a Dealer

Automatically maintain the chemical balance in your swimming pool and spa

The Watermatic L-1 is a complete system for feeding liquid chlorine and liquid muriatic acid.

Easy to install, operate and maintain, the system include controllers that plug into any 120V outlet and control two peristaltic pumps.

Available system:
Watermatic L-1; a C2000 electronic controller, two 3-310 fixed-rate peristaltic pumps, and a mounting board

Features

  • Complete liquid system
  • Easy to install and maintain
  • Clean, clear water 24 hours a day, seven days a week

Models

Models Description
L-1 Jandy Pro Series L-1 Automated Liquid Chlorine Feeder System

Parts Breakout Diagram

Water Purification PartsWatermatic Liquid Parts

Launch our online catalog viewer to review breakout diagrams and part numbers.

Learn More

Accessories

Models Description  
3-310 Jandy Pro Series 110V Peristaltic Pump
3-313 Jandy Pro Series Peristaltic Pump 110V Adjustable
G1000 Jandy Pro Series Dichlor Feeder Watermatic System Dichlor
9-700 Jandy Pro Series Flow Cell
3-270 Jandy Pro Series ORP Sensor, Sota
3-271 Jandy Pro Series ORP Sensor 1/2" Solid Body Style
3-280 Jandy Pro Series PH Sensor Sota
3-281 Jandy Pro Series PH Sensor 1/2" Solid Body Style
2-134 Jandy Pro Series Fitting 3/8" Compression X 1/4" Mnpt , G1000
2-135 Jandy Pro Series 1/8"M X 3/8 In Jaco Fitting G7500,G1000
2-610 Jandy Pro Series 1/2" X 1/2" Jaco Fitting G7500
2-620 Jandy Pro Series Compression Fitting Sensor 1/2" X 1/2"
3-060 Jandy Pro Series C310 Control Module 120V
3-065 Polaris C316 Control Module 24V
3-110 Jandy Pro Series C660 Control Module 120V
4-190 Jandy Pro Series Pipe Seal Washer G1000
5-310 Jandy Pro Series 1.5 Amp Slo Blow Fuse
5-320 Jandy Pro Series 1.6 Amp Slow Blow Fuse
5-330 Jandy Pro Series 5 Amp Fuse
6-166 Jandy Pro Series Carlon Controller Box Clear Cover (C660/C560)
8-035 Jandy Pro Series Float Arm Assembly. , G7500
8-050 Jandy Pro Series Flow Indicator Clear , G7500/G1000
8-090 Jandy Pro Series On/Off Valve, 1/8", G1000
8-101 Jandy Pro Series G1000 Valve And Strainer Assembly
8-400 Jandy Pro Series G1000 Parts Bag
8-405 Polaris Parts Bag, Venturi Kit, G1000A
8-800 Jandy Pro Series Check Valve Assembly. , G7500
8-850 Polaris Hopper Assembly, G7500
8-851 Polaris Tank Assembly G7500
8-900 Jandy Pro Series G1000 Upgrade Kit
8-901 Jandy Pro Series G1000 Rebuild Kit
9-620 Jandy Pro Series Transformer 110V-24V 400 Series Controller Black
9-701 Jandy Pro Series Flow Cell Switch
9-702 Jandy Pro Series Flow Cell Parts Bag
9-705 Jandy Pro Series Hopper Estension Kit 3 Bottle With Valves G1000
9-710 Polaris Venturi Kit 1 1/2" Plumbing
9-712 Jandy Pro Series 1/8 " Check Valve Gray
9-714 Jandy Pro Series 3/4 In Txt Check Valve 1/2 Lb.
9-717 Jandy Pro Series 1/2 " In Line Strainer
9-821 Polaris Large Bottle Valve, G7500
9-825 Polaris Extender Bottle 8 Lb
9-830 Jandy Pro Series G1000 Extender Neck
9-845 Jandy Pro Series 5 Gallon Chem Tank With Lid
9-846 Jandy Pro Series 10 Gallon Chem Tank With Lid
9-847 Jandy Pro Series 15 Gallon Chem Tank With Lid
9-960 Jandy Pro Series Mounting Board for Watermatic System

Frequently Asked Questions

Click to open a frequently asked question and answer.

A cloud of bubbles is forming in the chlorinator cell?

If the chlorinator and pump are running, it is normal for a cloud of small bubbles to be produced in the cell, indicating chlorine is being produced.

My pool has a strong chlorine odor?

Surprisingly, the issue here is not too much chlorine, as many imagine. Chloramines are formed by the bonding of chlorine with amines from sweat, urine and other sources. These chloramines make the "chlorine" odor and can also cause eye and skin irritations. Free chlorine does not smell (up to 10 ppm concentration). The remedy is to super chlorinate/shock dose. Refer to owner's manual for step by step instructions on how to shock dose.

My pool is green and there is no chlorine reading?

A chlorine residual of 1 to 3 ppm is considered desirable. The solution is to super chlorinate or "shock dose" especially in hot weather. This procedure raises the chlorine residual to a very high level for a short period of time and reduces chlorine demand. You will also need to check your stabilizer (cyanuric acid) levels to ensure it is between 30-50ppm. Refer to your owner's manual for step by step instructions on how to shock dose.

My water looks clean but there is no chlorine residual reading?

To test for chlorine residual, switch on the filtration system and turn the chlorinator to maximum output. After a few hours take a water sample from the pool. Test this water with your test kit or take it to a local pool professional. A minimum chlorine residual of 1 to 3 ppm is desirable.

1. Adjust PH within the range 7.2 to 7.6. Make sure your cell is clean (clean if required).

2. Check your stabilizer (cyanuric acid) levels. Increase the setting of the chlorine output control. Adjust total alkalinity to recommended range. Test for phosphates. Adjust total hardness to recommended range.

3. Increase chlorinator to maximum output. Check salinity level and ensure it's within the recommended range. Increase the running time of the filter and chlorinator. Make sure the filter is clean and functioning properly.

Should an anti-algae treatment be used in addition to the chlorinator?

If algae is present and a chlorinator is being used, algaecide can be used to remove troublesome algae. Please keep in mind that if you are also using a Nature 2 product, it is important not to use copper based algaecides.

The walls of my pool/spa are slimy?

This is caused by combined algae and bacteria growth. Scrub down affected walls and super chlorinate/shock dose using a large shock dose of liquid chlorine. Refer to owner's manual for step by step instructions.

There is a scale or calcium build up on the electrode of my chlorinator?

There are a couple of causes for this. First, your pH may be incorrect; test the water and adjust the pH range from 7.2 to 7.6. Second, the Total Alkalinity may be high; test the water and adjust total alkalinity from 80 to 120 ppm. Third, the Calcium Hardness may be too high; test the water and adjust the Calcium Hardness from 150 to 400 ppm.

1. Clean the scale from the cell (refer to the maintenance section in your owner's manual for step by step instructions) and increase the running time of the filter and chlorinator.

2. Make sure the filter is clean and functioning properly.

What are the standard chemical values?

Please refer to your Installation Manual for optimum pool water conditions, as these conditions may change depending on which product you're using.

What is Shocking?

Shocking is the same as Super Chlorinating. Shocking burns out the organic material that combines with chlorine. This frees the chlorine for sanitizing. Shocking is accomplished by raising the chlorine level quickly and dramatically. When the chlorine level is raised from 5 to 15 PPM the pool water is said to have been Super Chlorinated (shocked).

NOTE: On initial startup of a pool, it is best to Super Chlorinate from an outside source, i.e., use a shock treatment
available at your local pool supplier.

Protect your warranty!

Professional Installation Required

Pro Resources

Log in to your Zodiac Premium® account now to get access to pro resources.

Log in Now